Filter By:
BMX
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths.
- 7075 Aluminum
$39.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
$34.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$29.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$25.99
Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways.
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install.
SPECS
- 25.4mm diameter
- 6061-T6 Aluminium, CNC machined
$22.99 - $24.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs.
SPECS
- Forged from 7075-T6 aluminum for greater strength and durability
- Steel insert prevents guard deformation, prolonging bearing life
$22.99
- 4140 Chromoly
- 3 Possible peg positions for longer peg life
- 14mm with 3/8-inch adapters included
- 4 inches (length) x 1-3/8 inches (outer diameter)
- Sold in pairs
- 8.75 oz (17.5 oz for a pair)
$22.50
The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options.
- Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
$19.99
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Proven and reliable KMC 510-HX chain
- Factory installed half-link for a radically stronger set-up
$18.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- 1.5-inch outer diameter
- 14mm with 3/8-inch adapter
- Sold individually
- Weight: 7.6oz
- Replacement sleeves sold separately
$17.99
The Silencer V2 has a lightweight 6061 aluminum core supports the entire sleeve. The sleeve is made from our proprietary Thermalite material and resists cracking and deformation while sliding better than chromoly on most surfaces. The lengthy 4.4" peg ensures you maintain locked into grinds.
- Axle: 3/8" with included 10mm adapter
- Diameter: 1.6"
- Length: 4.4"
- Weight: 5.3-ounce each
- Sold individually
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered.
Available in 14mm or 3/8?.
$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
- Length: 60 – 65mm
- Black
$11.99
Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance.
- 160mm lenght
- Par Ends Included
$11.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm
$11.99
Cornerstone Grip features a ribbed design with Cornerstone logo.
- Includes Odyssey Par Ends
$11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort.
- 160mm
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
$8.50 - $8.99
The Gost pads feature a unique design to make install and set up easier.
- Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame
- Assembly is simplified by lining up the rim and tightening a M6 female bolt
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$5.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic.
- Sold singly
$5.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer).
- Length: 4.4-inch
- Diameter: 1.6-inch
- Material: Plastic (Thermalite)
- Weight: 0.8- ounce each
- Replacement sleeve only
- Sold individually
Page 1 of 2
Next page