Cranksets

The e*thirteen e*spec Plus Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These alloy crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self-extractor bolt is built into both arms for easy removal - 6061 Aluminum - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Cannondale cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M4 (minus 4mm - dished toward the frame): For Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes - M9 (minus 9mm - dished toward the frame): For standard (non-Ai offset) bikes - M1 (minus 1mm - dished toward the frame): For the Fat CAAD only

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

• Square taper interface • Only includes left crank

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset. - High-quality anodized finish - Precise and reliable shifting

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8

- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Shimano's new FC-RX600-11 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding, with tighter gear steps for maintaining optimum pedaling cadence. The 2x11-speed crank is available in a 46-30T or 40T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T, 40T

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

An attractive aluminum crank with hollow arms for lightweight, rigidity, and durability The newly designed crank arms offer an optimized balance between lightweight and efficiency. The crank, formed with hollow aluminum technology, is anodized with a beautiful gloss black anodized finish, giving it a luxurious look. The resin ribs on the back of the chainrings are SHIMANO 105's unique structural design that achieves both thorough weight reduction and crisp shifting performance. FEATURES - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWTECH II structure cuts weight yet maintains strength for better power transfer - Crank arm length: 160, 165, 170, 172.5, 175 mm - Gear combination: 50-34T, 52-36T - Q-factor: 148 mm

The Shimano SLX FC-M7100 crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Chainring sold separately - Hollow forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance - Features 52mm chainline - 172mm Q-factor - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs - Crank Length: 165mm - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: Shimano Hollowtech II - Drivetrain Speeds: 12 - Chainring BCD: Direct Mount

- Series: SLX - Crank Construction: HOLLOWTECH II Technology

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

SRAM's Apex Crankset is designed for capable stiffness at an impressive weight. The cold-forged aluminum arms are tough, rigid and perfectly complement your favorite ride. SRAM's long-lasting Powerglide chainrings are hard anodized and designed for quick, positive shifting in all conditions. Plus, the Apex crankset comes with SRAM's smooth-spinning GXP bottom bracket.

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

- Replacement bolt for DUB cranks