Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Cables

$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$5.99
- Complete cable kits for internal three-speed hubs
$4.99
- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert
$41.99 - $49.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
$8.99
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
$27.99 - $29.99
Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths. - Compact design makes new electric components smaller and lighter - EP8 EP800 Series
$35.99
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
$2.49
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
$49.99
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes. - Black Banjo Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature a black banjo fitting at the caliper - 2000mm black hose - Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key - Compatible with Level ULT, Level TLM (A1), Code R/RSC (B1), RED eTap HRD, S900 Monoblock
$39.99
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes. - Double Compression Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature compression fittings at both lever and caliper - Hydraulic line kit is compatible with both DOT and Mineral Oil brake fluid brakes - 2000mm black hose - Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key - Compatible with AVID Code R, Elixir 1/3, Juicy 3, DB 1/3, DB8, Level ULT/TLM (B1), Level T, Guide RE, G2 RE/RS/R, S9002P (RED, Force, Rival-2P eTap AXS)
$52.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes. - Beveled Banjo Hydraulic Brake Hose Kit fits SRAM road bike brakes that feature a beveled banjo fitting at the lever - 2000mm black hose - Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, extra banjos, hose clips, and T8 Torx L-Key - Compatible with Flat Mount, RED 22, Force 22, Rival 22, Force 1, Force CX1, Apex1 HRD, S700
$51.99
Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black
$37.00 - $40.00
SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.
$6.00 - $7.00
- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable
$3.99
- Sold in pairs - Allen wrench included
$11.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm
$4.50 - $4.99
The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length
$7.99 - $88.99
Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.
$23.99
Jagwire 4/5mm Wedge Type Housing or Hose Guide Bag of 50
$10.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
$14.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
$5.99
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
$24.99 - $28.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$11.99 - $13.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.
$8.99 - $32.99
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
$21.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$34.99 - $59.99
Mountain Pro kits offer both enhanced performance and style. But unlike Road Pro Kits, shift and brake systems are sold separately. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while Kevlar-reinforced, compressionless brake housing delivers smooth, powerful braking performance. And, with all the needed parts included, our Mountain Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and Kevlar-reinforced, compressionless brake housing enhance performance - Designed to keep gunk out - enough housing for continuous runs, including seal liners if a bike has stops - A step above standard OEM cables and housing - Appearance options from classic to colorful Specs: - Housing Construction: KEB with Slick-Lube Liner - Outside Diameter: 5.0mm - Housing Length: 3000mm - Cable Construction: TEC-ST - Compatibility: SRAM/Shimano Mountain - Front Cable Length: 1350mm - Rear Cable Length: 2350mm What's Included: 1 3000mm KEB-SL Kevlar-Reinforced Brake Housing 1 1350mm Teflon-Coated Front Brake Inner Cable 1 2350mm Teflon-Coated Rear Brake Inner Cable 4 Lined Alloy End Caps 2 POP Alloy End Caps 2 Cable Tips 2 4G Tube Tops 3 Cable Donuts 2 Rotating Hooks 1 650mm Sealing Liner
$0.30 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$12.99
- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm
$12.99 - $17.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Page 1 of 6 Next page